pinterest

Follow Me on Pinterest

Wednesday, September 28, 2011

Let There Be Light

Here is my craft room work space.  It's not quite set up yet, but I'm getting there.  I have been working at my table, but the only light in the room comes from behind me.  As you can see from the lamp shadow on the wall, it makes the space very hard to work in, especially after dark.  It needed another light, but my darling husband is very busy and I'll wait forever waiting for him to install one. 

When we first moved in, this corner was supposed to be a reading nook but when circumstances forced us to make this room an additional sleeping space, I turned that corner into my crafting space.
But the hook for a hanging pendant light was still in the ceiling.  When I was cleaning up the space a few weeks ago, I found a new swag light kit and after an evening of frustrated crafting in shadow yesterday, I decided to put the kit together.  I mean, really, how hard could THAT be? :D

I followed the instructions - which were super simple (basically strip the wire, tie a knot, wrap the ends around the screws, tighten and done. I attached a shade I had in a closet, and VOILA! LIGHT (insert angel songs here).

This was a super easy, job that took a total of 5 minutes start to finish! Soon I will decorate the shade to jazz it up, but for now I'm just happy to be able to see while I work!

Monday, September 26, 2011

Photo Transfer

I am looking for specific art for my master bedroom.  I want the room to be masculine and old world looking, but modern. I know, its complicated.  What I really have my heart set on are crowns and maps. While looking for the perfect images, I came across many blog sites teaching how to transfer images to canvas and wood using "gel medium".  WOW! There's no end to the things I can create with THAT technique.  So as I research it more, I discover that you can (apparently) use a multitude of products to actually do the transfer.
Not wanting to go to the store stupid uneducated I was waiting until I felt more confident before venturing off to the art store to get supplies.  But I'm impatient too.  I had a little bit of time on my hands today and I have a bottle of Mod Podge on hand and a few dollar store art canvas.  My research shows that this is a reversible project, in that, if it doesn't work, a new coat of gesso or paint, and the canvas is good as new as if it never happened.  Ha ha! Fool proof! My favourite kind of craft.

I was so excited to give it a shot, that I forgot to take some pictures, but here's how it goes:

I searched trusty old Google for Crown and found a perfect beauty over here at, of all places, a tattoo flash site.  Anyway...

I printed it on my ink jet printer, cut it to size so there wasn't a lot of extra paper because when it's dry, I have to rub off all the paper. 

I coated my canvas with a decent coat of Mod Podge. Not too much, just enough to coat the entire canvas. Even though my graphic doesn't cover the whole canvas, I want the entire canvas to have a uniform sheen. 
I placed my graphic on the canvas ink side down.  If using a text graphic, make sure to flip it to mirror image first!
Then I took my ruler and GENTLY scraped over the entire canvas starting in the center and working up, then down, then across from one side to the other.  That scrapes out any air bubbles, lumps, lines, bumps and other imperfections and it makes sure the graphic is adhered well to the canvas.
Now we wait for the mod podge to dry. Tick tock (this is where the magic of video would come in handy). So while I wait for it to dry, here's how it looks right now:

When the canvas is totally dry, you gently spray the paper backing with water and rub off the back layer of paper.  The ink part is supposed to stay adhered to the canvas.  How hard can it be right?

Well... remember before when I said this was fail proof, because if it didn't work, I could start over as if it never happened?  Good thing it's that kind of craft, because it totally didn't work!  That's what I get for being impatient!  But It wasn't clear on the interweb (as we call it around here for fun) if MP was a good medium for this.  I can now tell you emphatically, it is NOT the right product for this project.  It's great for many many things...but this is not one of them.  Let me show you what happened:

So it's been sprayed with water, and I started rubbing, and as you can see, the ink ran.







The more I rubbed to remove the paper, the more the ink ran, and eventually disappeared.

I can see the potential here, so I'm going to go find the proper medium to do this project.  It's going to be exactly what I have been looking for.  So now I know what not to do!






What I learned: 
  1. While Mod Podge is a fantastic product with tons of possibilities, this is not one of them.
  2. I used a stretched canvas.  With the amount of rubbing that had to be done, a flat canvas, or loose canvas will be better. 
  3. Ink jet printing is not suitable for this project.  It has to be laser printing.
  4. With the right medium, this is going to be a fantastic project with tons of possibilities. 
So now I'm off to the art store to find the gel medium, as soon as I send my files to Staples for printing on the laser printer!

Sunday, September 25, 2011

Fool Proof White Cake Challenge

Part of the reason we renovated our kitchen was to allow DH and I to actually share the kitchen.  He loves to cook on weekends, and I am in charge of that chore during the week.  Trouble is, I have a very small repertoire of meals I can cook.  So I promised (threatened) to expand my horizons and talents.

To support the cause my darling hubby bought "us" a beautiful Kitchenaid Stand Mixer around Mother's Day.  It remained in the box until the kitchen was finished and then it went into it's little garage until today :) 
Look at that bad girl!  She's so pretty! 
I pulled out all the ingredients needed for this fool proof recipe and got started.  Yes, that's sour cream you see there.  I'm thinking it's a bit weird, at this point too, but we shall see after the taste test.
So I measured carefully and added the dry ingredients.  That part was easy... except the flour made a mess and my laptop was too close to where I was working so I think a bit of flour might now call my keyboard home.  Sigh. 
Then the butter.  I have a full pound softened and ready to use.  The recipe calls for 2/3 cups butter.  I look at the package and there are markings for measurements but not 2/3 cup.   Hmmmm guess I'll have to put it in a measuring bowl then. 

The rest of the mixing goes pretty smoothly.  The finished batter, looks like cake batter from a box, smells like cake, so into the oven they go.  The pans looked a little full and I was worried they would overflow in the oven.  They didn't.  As they cooked, they started to smell like box cake. 
So far, this challenge was pretty easy!  If the taste is good I would do it again from scratch.  One, it costs less, two, it limits the additives in our diet (some of which I have a sensitivity to). 
The icing is home made too.  An old-fashioned butter cream frosting.  That was super easy, especially with my new best friend doing all the work. 
I will update this post after dinner with a finished product picture and taste results.  In the meantime, here's the recipe for you:
No Fail White Cake Mix
·    3 cups all-purpose flour
·    1 tbsp baking powder
·    ½ tsp baking soda
·    2 cups sugar
·    ¾ tsp salt
·    2/3 cup butter, at room temperature and cut into small pieces
·    3 large eggs
·    ½ cup full fat sour cream
·    1 tbsp pure vanilla extract
·    1 cup 2% milk
Preheat oven to 350 degrees F. Grease and flour two round 9x2-inch cake pans and line the bottoms with a round of parchment paper.
Sift together flour, baking powder and baking soda into the bowl of a stand mixer fitted with a paddle attachment. Add sugar and salt and mix on low speed until ingredients are well blended, about 2 minutes. Add softened butter and beat on slow speed until the mixture is a sandy, crumbly consistency and everything is well combined.
 
In a separate bowl, whisk eggs until blended. Add sour cream and vanilla whisk until smooth. Add half of the milk and whisk to blend. Gradually pour this mixture into the flour mixture while mixing at low speed for 5-10 seconds. Pour in remaining milk and continue beating at medium speed until the dry ingredients are just incorporated and batter appears smooth. Scrape down the bottom and sides of the bowl with a rubber spatula and mix for another 5 seconds. Do not over mix.
 
Pour batter into prepared pans and bake 30-35 minutes.
Or spoon batter into paper lined muffin tray and bake 15-20 minutes.

Recipe Courtesy of Steven and Chris on CBC
Things I learned:
  1. Using my laptop to store and use recipes is not wise.  Either I have to put my laptop further away, or I need to print my recipes for use.
  2. Measure the butter while still hard and cut into cubes before softening.  
  3. Use the convection feature on my oven for even baking.
  4. Find the cake tester and have it ready before the timer goes off :)
*Edit after test taste:

Husband (who has had made-from-scratch cake before) says it's VERY good.  That's a good thing for me because he doesn't use the word "very" with "good" very often. He scored it an 8 out of 10 because he didn't like the plain-ness of the vanilla.

My first impression was that I did not like it at all.  The texture is strange, but then I've only ever had commercial made or box cakes.  As a plain vanilla cake it's a bit boring.  On second taste, it would be yummy if I had a nice Tim Horton's coffee to go along with it.  It would probably be better with chocolate icing, or maybe with some orange zest or served as on the tv show with lots of fresh fruit. 

The texture sort of reminds me of pound cake but not quite.  I think I might have been afraid of over mixing it, and didn't mix it enough.  So all in all, the flavour is good.  Hubby liked it and that's something.  I'll try it again, but next time I will change the icing, and mix the batter a little more, AND I will have coffee ready to have with it.

If you try it, let me know what you think and what you did different, if anything.